Welcome to the Database of the 2nd Division Weapons. Here, you may find different weapons and information on them.
Shuriken: Shurikens are the most noticed weapons of a ninja. They are a must-have. It can also be used as a last resort.
Shurikens are a small(it may fit the size of your palm), star-shaped long-ranged weapon made from steel, which gives it a dark color. It also has a hole in the middle.
Shurikens can be thrown from long ranges. They have a small size and can nearly hit anything. They can never miss because they have four or five edges. Shurikens of poorer quality were sometimes bedded into the ground for improvised use as caltrops.
SAYINGS ABOUT A SHURIKEN It is said that four-star shurikens are for experts, and five-star shurikens or with more stars, are for beginners. It has also been said that shurikens can be used as hidden melee weapons, but no historical evidence exists of this rather uncommon use
Kunai: kunai is an ancient Japanese kind of gardening tool or trowel. Two variations are the short kunai and the big kunai It is a good example of a very basic tool which, in the hands of a martial arts expert, could be used as a multi-functional weapon.
The kunai was conventionally wrought of ranged from 20 cm to 60 cm, with the average at 40 cm. The kunai was used by common folk as multi-purpose gardening tools and by workers of stone and masonry. The kunai is not a knife, but something more akin to a crowbar. The blade was soft iron and unsharpened because the edges were used to smash plaster and wood, to dig holes and to pry. Normally only the tip would have been sharpened. The uses to which a kunai was put would have destroyed any heat-treated and sharpened tool like a knife.
Kunai normally had a leaf-shaped blade and a handle with a ring on the pommel for attaching a rope. This would allow the kunai's handle to be wrapped to act as a grip, or when used as a weapon; to be strapped to a stick as an expedient spear, to be tied to the body for concealment, or to use as an anchor or piton.
Contrary to popular belief, they were not designed to be used primarily as throwing weapons, though they can be thrown and cause damage. Instead, they are a thrusting and stabbing implement.
Spikes: Also known as Bo-Shuriken, they is a throwing weapon consisting of a straight, iron or steel spike, usually 4-sided but sometimes round or octagonal in shape. They are usually single-pointed, but there are some that are double-pointed. The length of bo-shuriken ranges from 12 to 21 cm (5–8 1/2 in) and the average weight was from 35 to 150 grams (1.2–5.4 ounces). The bo-shuriken is thrown in a number of ways, such as overhead, underarm, sideways and rearwards, but in each case, the throw involved the blade sliding out of the hand through the fingers in a smooth, controlled flight. This is not to be confused with the kunai, which is a thrusting and stabbing implement that is sometimes thrown.
The major forms of throw are the jiki da-ho (direct hit method), and the han-ten da-ho (turning hit method). These two forms are technically different, in that the former does not allow the blade to spin before it hits the target, while the latter requires that the blade spin before it hits the target.
Bo-shuriken were constructed from a wide variety of everyday items, and thus there are many shapes and sizes. Some derive their name from the materials they were fashioned from, such as kugi-gata (nail form), hari-gata (needle form) and tanto-gata (knife form); others are named after the object to which they appear similar, such as hoko-gata (spear form), matsuba-gata (pine-needle form) while others were simply named after the object that was thrown, such as kankyuto-gata (piercing tool form), kunai-gata (utility tool form), or teppan (plate metal) and biao (pin).
Other items were also thrown as in the fashion of bo-shuriken, such as kogai (ornamental hairpin), kogata (utility knife) and hashi (chopsticks), although these items were not associated with any particular school of shurikenjutsu, rather they were more likely just thrown at opportune moments by a skilled practitioner who was skilled in a particular method or school.
Shinobikatana: The Shinobikatana, also known as a ninjato or ninjaken is perhaps the most known and identifiable weapon of the ninja arsenal.
It is drastically different than the standard katana in many ways. Usually it's single edged straight blade is nothing more than a piece of sharpened iron 20-27 inches in length and forged with less than ideal equipment. It commonly has an oversized, square shaped tsuba (handguard).
A frequent practice among ninja is to contain the blade in a saya (scabbard) longer than the blade itself. The excess space allows for storage of a multitude of items such as poisons, powdered medicines, and flash powders, small shurikens, caltrops, or even a small knife or other small weapons in it's detachable bottom.
Katana: The katana is a type of Japanese sword , and is often called a "samurai sword." The term katana may be applied to the standard size moderately curved [as opposed to the older "tachi" style featuring more curvature] Japanese sword with a blade length of greater than (27" inches). The term is sometimes incorrectly used as a generic name for any kind of Japanese sword. In Portuguese the designation (spelled catana-perhaps delineated from the Japanese word when Portuguese traders first arrived in Japan) refers to a slightly shorter and wider blade, commonly used to clear paths through dense jungle, or to otherwise cut down wild vegetation.
The katana is characterized by its distinctive appearance: a curved, slender, single edged blade, circular or squared guard, and long grip to accommodate two hands. It has historically been associated with the samurai of feudal Japan, and has become renowned for its sharpness and cutting ability, to the point that its purported cutting capabilities have reached mythical status.
Ninjato: The ninjatō (忍者刀?), also known as ninjaken (忍者剣?) or shinobi gatana (忍刀?), is the most common name for the reputed (if not, fictional) sword a ninja would have carried. According to Masaaki Hatsumi, Sōke or Grandmaster of the Bujinkan, these swords came in a variety of shapes and sizes. Often, however, they were much shorter than the traditional daito katana used by the samurai of feudal Japan. The straight bladed, square guard sword (as seen in the image) is a product of the modern imaginative conception.
The typical ninjatō carried by a ninja would most likely have been a wakizashi or shortsword fitted with a katana-length handle and placed in a katana-length saya (scabbard). This may have been used to deceive one's opponents into miscalculating how quickly it could be drawn allowing one to use a battoujutsu strike faster than expected. It also disguises the weapon (that would easily identify them as a ninja) as a common sword. The extra space in the saya may also be used to store or hide other equipment or goods, such as tubes which act as snorkels or shiruken. Another advantage to using such a short sword was the increased ease of fighting at close quarters, an irrevocable requirement of an assassin or intelligence gatherer.
Modern ninjato are often straight with a square tsuba (hand guard), but this is not historically accurate. According to the same book by Masaaki Hatsumi, the ninja ken was straight, but only in contrast to the average sword of the period which were much more curved. The ninja ken still had a slight curve to the sword.
The Bujinkan dojo currently contains one school, the Togakure-ryū, which teaches the use of the ninja ken. Typically, this is a sword of wakizashi-length (slightly longer swords have been known to be allowed) that has been outfitted with katana sized koshirae (fittings).
Tachi: The tachi is a Japanese sword, often said to be more curved and slightly longer than the katana. However, Gilbertson, Oscar Ratti, and Adele Westbrook state that a sword is called a tachi when hung from the obi (belt or sash) with the edge down, and the same sword becomes a katana when worn edge up and thrust through the girdle. The "tachi" style was eventually discarded in favor of the katana.
The daitō (long swords) that pre-date the katana average about 78cm in blade length, larger than the katana average of around 70cm. Unlike the traditional manner of wearing the katana, the tachi was worn hung from the belt with the cutting-edge down, and was usually used by cavalry. Deviations from the average length of tachi have the prefixes ko- for "short" and ō- for "great or large" attached. For instance, tachi that were shōtō and closer in size to a wakizashi were called kodachi. The longest tachi (considered a 15th century ōdachi) in existence is more than 3.7 meters in total length (2.2m blade) but believed to be ceremonial. In the year 1600, many old tachi were cut down into katana. The majority of surviving tachi blades now are o-suriage, so it is rare to see an original signed ubu tachi.
In the case of Ninja, occasionally some of the Ninja leaders were originally samurai, so they use tachi as a ceremonial inheritance, and other cases when they kill an enemy samurai lord, they took the tachi of the deceased daimyo to give to their masters, letting them know their enemy has fallen.
Shuriken: Shurikens are the most noticed weapons of a ninja. They are a must-have. It can also be used as a last resort.
Shurikens are a small(it may fit the size of your palm), star-shaped long-ranged weapon made from steel, which gives it a dark color. It also has a hole in the middle.
Shurikens can be thrown from long ranges. They have a small size and can nearly hit anything. They can never miss because they have four or five edges. Shurikens of poorer quality were sometimes bedded into the ground for improvised use as caltrops.
SAYINGS ABOUT A SHURIKEN It is said that four-star shurikens are for experts, and five-star shurikens or with more stars, are for beginners. It has also been said that shurikens can be used as hidden melee weapons, but no historical evidence exists of this rather uncommon use
Kunai: kunai is an ancient Japanese kind of gardening tool or trowel. Two variations are the short kunai and the big kunai It is a good example of a very basic tool which, in the hands of a martial arts expert, could be used as a multi-functional weapon.
The kunai was conventionally wrought of ranged from 20 cm to 60 cm, with the average at 40 cm. The kunai was used by common folk as multi-purpose gardening tools and by workers of stone and masonry. The kunai is not a knife, but something more akin to a crowbar. The blade was soft iron and unsharpened because the edges were used to smash plaster and wood, to dig holes and to pry. Normally only the tip would have been sharpened. The uses to which a kunai was put would have destroyed any heat-treated and sharpened tool like a knife.
Kunai normally had a leaf-shaped blade and a handle with a ring on the pommel for attaching a rope. This would allow the kunai's handle to be wrapped to act as a grip, or when used as a weapon; to be strapped to a stick as an expedient spear, to be tied to the body for concealment, or to use as an anchor or piton.
Contrary to popular belief, they were not designed to be used primarily as throwing weapons, though they can be thrown and cause damage. Instead, they are a thrusting and stabbing implement.
Spikes: Also known as Bo-Shuriken, they is a throwing weapon consisting of a straight, iron or steel spike, usually 4-sided but sometimes round or octagonal in shape. They are usually single-pointed, but there are some that are double-pointed. The length of bo-shuriken ranges from 12 to 21 cm (5–8 1/2 in) and the average weight was from 35 to 150 grams (1.2–5.4 ounces). The bo-shuriken is thrown in a number of ways, such as overhead, underarm, sideways and rearwards, but in each case, the throw involved the blade sliding out of the hand through the fingers in a smooth, controlled flight. This is not to be confused with the kunai, which is a thrusting and stabbing implement that is sometimes thrown.
The major forms of throw are the jiki da-ho (direct hit method), and the han-ten da-ho (turning hit method). These two forms are technically different, in that the former does not allow the blade to spin before it hits the target, while the latter requires that the blade spin before it hits the target.
Bo-shuriken were constructed from a wide variety of everyday items, and thus there are many shapes and sizes. Some derive their name from the materials they were fashioned from, such as kugi-gata (nail form), hari-gata (needle form) and tanto-gata (knife form); others are named after the object to which they appear similar, such as hoko-gata (spear form), matsuba-gata (pine-needle form) while others were simply named after the object that was thrown, such as kankyuto-gata (piercing tool form), kunai-gata (utility tool form), or teppan (plate metal) and biao (pin).
Other items were also thrown as in the fashion of bo-shuriken, such as kogai (ornamental hairpin), kogata (utility knife) and hashi (chopsticks), although these items were not associated with any particular school of shurikenjutsu, rather they were more likely just thrown at opportune moments by a skilled practitioner who was skilled in a particular method or school.
Shinobikatana: The Shinobikatana, also known as a ninjato or ninjaken is perhaps the most known and identifiable weapon of the ninja arsenal.
It is drastically different than the standard katana in many ways. Usually it's single edged straight blade is nothing more than a piece of sharpened iron 20-27 inches in length and forged with less than ideal equipment. It commonly has an oversized, square shaped tsuba (handguard).
A frequent practice among ninja is to contain the blade in a saya (scabbard) longer than the blade itself. The excess space allows for storage of a multitude of items such as poisons, powdered medicines, and flash powders, small shurikens, caltrops, or even a small knife or other small weapons in it's detachable bottom.
Katana: The katana is a type of Japanese sword , and is often called a "samurai sword." The term katana may be applied to the standard size moderately curved [as opposed to the older "tachi" style featuring more curvature] Japanese sword with a blade length of greater than (27" inches). The term is sometimes incorrectly used as a generic name for any kind of Japanese sword. In Portuguese the designation (spelled catana-perhaps delineated from the Japanese word when Portuguese traders first arrived in Japan) refers to a slightly shorter and wider blade, commonly used to clear paths through dense jungle, or to otherwise cut down wild vegetation.
The katana is characterized by its distinctive appearance: a curved, slender, single edged blade, circular or squared guard, and long grip to accommodate two hands. It has historically been associated with the samurai of feudal Japan, and has become renowned for its sharpness and cutting ability, to the point that its purported cutting capabilities have reached mythical status.
Ninjato: The ninjatō (忍者刀?), also known as ninjaken (忍者剣?) or shinobi gatana (忍刀?), is the most common name for the reputed (if not, fictional) sword a ninja would have carried. According to Masaaki Hatsumi, Sōke or Grandmaster of the Bujinkan, these swords came in a variety of shapes and sizes. Often, however, they were much shorter than the traditional daito katana used by the samurai of feudal Japan. The straight bladed, square guard sword (as seen in the image) is a product of the modern imaginative conception.
The typical ninjatō carried by a ninja would most likely have been a wakizashi or shortsword fitted with a katana-length handle and placed in a katana-length saya (scabbard). This may have been used to deceive one's opponents into miscalculating how quickly it could be drawn allowing one to use a battoujutsu strike faster than expected. It also disguises the weapon (that would easily identify them as a ninja) as a common sword. The extra space in the saya may also be used to store or hide other equipment or goods, such as tubes which act as snorkels or shiruken. Another advantage to using such a short sword was the increased ease of fighting at close quarters, an irrevocable requirement of an assassin or intelligence gatherer.
Modern ninjato are often straight with a square tsuba (hand guard), but this is not historically accurate. According to the same book by Masaaki Hatsumi, the ninja ken was straight, but only in contrast to the average sword of the period which were much more curved. The ninja ken still had a slight curve to the sword.
The Bujinkan dojo currently contains one school, the Togakure-ryū, which teaches the use of the ninja ken. Typically, this is a sword of wakizashi-length (slightly longer swords have been known to be allowed) that has been outfitted with katana sized koshirae (fittings).
Tachi: The tachi is a Japanese sword, often said to be more curved and slightly longer than the katana. However, Gilbertson, Oscar Ratti, and Adele Westbrook state that a sword is called a tachi when hung from the obi (belt or sash) with the edge down, and the same sword becomes a katana when worn edge up and thrust through the girdle. The "tachi" style was eventually discarded in favor of the katana.
The daitō (long swords) that pre-date the katana average about 78cm in blade length, larger than the katana average of around 70cm. Unlike the traditional manner of wearing the katana, the tachi was worn hung from the belt with the cutting-edge down, and was usually used by cavalry. Deviations from the average length of tachi have the prefixes ko- for "short" and ō- for "great or large" attached. For instance, tachi that were shōtō and closer in size to a wakizashi were called kodachi. The longest tachi (considered a 15th century ōdachi) in existence is more than 3.7 meters in total length (2.2m blade) but believed to be ceremonial. In the year 1600, many old tachi were cut down into katana. The majority of surviving tachi blades now are o-suriage, so it is rare to see an original signed ubu tachi.
In the case of Ninja, occasionally some of the Ninja leaders were originally samurai, so they use tachi as a ceremonial inheritance, and other cases when they kill an enemy samurai lord, they took the tachi of the deceased daimyo to give to their masters, letting them know their enemy has fallen.
Wed Jan 03, 2024 12:18 pm by Senetue
» Return of the Fallen -WIP-
Wed Jan 18, 2017 12:27 pm by Aki_624
» Hello Friends
Sat Jul 16, 2016 12:44 am by Senetue
» Fumetsu no kōfuku, 12th Division Captain
Mon Jun 27, 2016 1:29 am by Fumetsu no kōfuku
» Asgier Blackbane (WIP) (continued)
Fri Apr 29, 2016 11:14 am by vergil_90